Performing a firmware update on a Nighthawk router brings bug fixes and adds new features to the device. Not only this, but it also helps to avoid issues like routerlogin not working. But, have you ever imagined a scenario when the Nighthawk router won’t update? Well, that can be quite exasperating. But, taking into account the scenario that you are on this post, we hope that by its end, you will get success in upgrading the firmware of your Netgear Nighthawk wireless router without any hassle. Keep reading.
Fixed: Nighthawk Router Won’t Update
Troubleshooting the issue will come later but are you sure that you uploaded the correct firmware file on your router? Out of 10 users, 6 commit the mistake of uploading a file that does not belong to their routers. This mistake generally happens when the user downloads the firmware file. Therefore, ensure that you have downloaded the correct firmware file as per the model number of the router. Apart from this, verify that you upload the unzipped file of the router if it is needed.
Just in case everything is fine with the file to be uploaded on the WiFi router, consider referring to the steps mentioned below to get the problem fixed:
- Update the Browser
The very first reason you are unable to update your wireless router is that you are using an outdated version of the web browser to carry out the process. Remember that no matter which router-related operation is being carried out with the help of the browser, the browser is supposed to be updated.
So, go to the settings section of the web browser and update it to the latest version. You need to do one more thing with respect to the internet browser. You are required to clear its cache, cookies, and search history.
- Do Not Interrupt the Process
Another reason why the Nighthawk router won’t update is an excessive interruption. Perhaps, you were quite impatient while the firmware of the router was being updated and started playing games on your laptop. Chances are also that you refreshed the browser and the firmware progress got halted.
Keep in mind that for a successful firmware update, it is necessary that the user stays on the Netgear Nighthawk setup wizard and avoid performing any background activities. Tweaking the cable connections can also result in failure. Thus, avoid doing that. You must wait patiently till your router reboots indicating that the firmware update process has been completed.
- Check the Internet Connection
You might see no progress in the firmware update process of your Nighthawk router if the internet connection is intermittent. Well, it can happen if you haven’t established a stable connection between your WiFi router and the modem. Know that it completely depends on the source of the connection between devices. If they are sharing a wireless connection, then you are supposed to ensure that your devices are neither placed too close nor too far.
Just in case your devices are sharing an Ethernet connection, you need to make sure that the cable is properly connected to the ports of your WiFi devices. However, it is not sufficient. The cable must be intact and connected to the correct ports. You are required to get in touch with your Internet Service Provider if the Internet connection is too poor.
- Restart the WiFi Router
The last thing you can do to resolve the issue in the discussion is to power cycle the router. Not only the router but the entire home network can be restarted. It is because doing so will resolve network errors and chances are that you will get success with the firmware update process. However, you are required to reboot the devices in a specific manner and sequence.
First of all, disconnect your modem and router. Thereafter, power down the modem and disconnect it from the power outlet. The next turn is off the WiFi router. Now, you are supposed to wait for 20 minutes. Thence, power up the devices in the exact order you powered them down. But, before that, do not forget to reconnect them.
The Bottom Line
Now, we are ending our post written to reveal the fixes if the Nighthawk router won’t update. We are now assuming that you will be able to get rid of the issue you were facing. Thanks for staying connected!
