Wavlink AC1200 Extender Setup

The Wavlink AC1200 Setup increases the coverage and range of your current WiFi network.It is easy to fix if the WiFi connection is poor or nonexistent in some areas of your house or place of business. By installing the AC1200 extender, you may successfully expand the WiFi network’s coverage area, giving you access to the internet from more rooms in your building.

Wavlink AC1200 Setup Via Manual method

The Wavlink AC1200 Setup dual-band Wi-Fi range extender may extend the coverage and range of your present wireless network. Follow these procedures for manual setup:

  • First, connect the Wavlink AC1200 Setup to an electrical outlet.
  • Join the extender’s Wi-Fi network using your computer or a mobile device.
  • Open any online browser of your choice, such as Google Chrome or Internet Explorer.
  • Enter the Wavlink extender’s default web address, wifi.wavlink.com or in the address bar.
  • The Wavlink extender’s login screen is now visible.
  • Enter your login and password after that.
  • To complete the Wavlink extender configuration, follow the on-screen directions. 
  • Wait for the three green LED lights to illuminate, indicating that your extender has been successfully configured.

The Wavlink AC1200 setup has been successfully completed. Now that any dead areas have been covered, you can extend your home’s Wi-Fi network.

Wavlink AC1200 Wifi Extender Setup Via WPS 

If your router also supports WPS, configuring your Wavlink AC1200 extender through WPS is a quick and simple process. 

Follow these steps for Wavlink AC1200 setup using WPS:

  • Near your Wi-Fi router, plug in the AC1200 extender.
  • Wait for the power LED light to turn solid green.
  • Press the WPS button on your extender until the WPS LED light starts blinking.
  • After two minutes, click the WPS button on your WiFi router.
  • The WPS LED light turning solid green means your extender has been successfully executed.
  • Move the AC1200   to the desired location within the range of the current Wi-Fi network you are using.

You should now be able to use WPS to set up your Wavlink AC1200 extender to utilise the increased Wi-Fi range.

Common Issues during wavlink AC1200 wifi extender setup

  • Incorrect mywifiext password
  • WiFi extender is connected but no internet
  • Can’t connect to mywifiext.local
  • Your wifi extender is not connected to the network
  • Netgear genie app doesn’t open
  • Issues while accessing IP address
  • Lost configuration CD
  • WiFi connectivity issues
  • Netgear extender red light causing issues
  • Unable to perform the extender reset process
  • Internet connected but not working

How to Update Firmware on Wavlink AC1200 WiFi extender?

Update the firmware on your Wavlink AC1200 extender immediately.Performance improvements for your extender are possible, and firmware updates can fix any flaws or issues.

Here’s how to update your Wavlink AC1200 extender firmware:

  • Join the network of the Wavlink AC1200  Extender with your computer.
  • Open a browser and enter the Wavlink AC1200 Extender’s default IP address in the address bar.
  • To log in, use the “admin” default password.
  • After you’ve reached the “Administration” screen, click the “Firmware Upgrade” button. Check for fresh updates.
  • Download the most recent firmware version that is available at this time.
  • Don’t unplug your extender until the process is complete.
  • The Wavlink AC1200 Extender will restart automatically after the firmware upgrade process is finished.
  • Log in to the device’s web interface once again to confirm the firmware version update.

Wavlink AC1200 Extender Reset process

If you are having trouble with your Wavlink AC1200 WiFi extender, you may need to reset it to its factory default settings.

Follow these procedures to reset your Wavlink AC1200 WiFi extender:

  • First, plug the extender into a power outlet to reset the Wavlink AC1200 .
  • Locate a factory reset hole on the extender’s side.
  • You can reset your extender by using a paper clip or pin.
  • For 8 to 10 seconds, press the reset button next to the hole.
  • Now your Wavlink AC1200 Extender has been successfully reset.
Share your love
apsetup wavlink
apsetup wavlink
Articles: 1

Leave a Reply