Ultimate Guide for Wavlink Extender Setup

The Wavlink extender amplifies the wireless network signals in your home. It lets you connect your smartphones and computers to the wireless network from any room in your house. To do this, you should know the necessary steps for the Wavlink wifi extender setup.
There are three ways how you can set up the Wavlink extender. We shall look at how you can perform each of these.

Wavlink Extender Setup via Manual Method

If you have a big office or house then accessing the internet using the router might not be enough. It is why doing the Wavlink extender setup is of benefit to you.
Let us check out how you can perform this process with the manual method.

1. Unpack the Wavlink Extender

The first and foremost thing you need to do is unwrap your range extender box. Ensure that none of the things in the package are defective.

2. Connect the Network Devices

Once the LED lights turn on, Use an Ethernet cable to connect one side of the extender to the other side of the wireless router. Verify that the Ethernet cable is not faulty and connection should be finger-tight.

3. Turn on the Extender

Now, plug the extender into a power outlet. Thereafter turn on the switch. make sure that the constant power supply comes from the wall outlet. Hold the Power On/Off button for a couple of minutes.

4. Pull Up the Internet Browser

Open a web browser on your computer. Here, navigate to the web browser that you like. You can choose any browser whether it is Google Chrome, Opera, Vivaldi, IE, Brave, or Microsoft Edge. Whatever browser you choose make sure that it is upgraded.

5. Access the Web Page

Now, go to the URL field of the browser and type the default Wavlink extender web address. The default web URL is wifi.wavlink.com or ap.setup. You can also use an IP address to access the web page. Once done, press Enter. Don’t use the search bar of the web browser for acquiring the URL.

6. Fill in the Login Details

The moment you hit the Enter button, the Wavlink range extender login window will come into view. Here, enter the default username and password. Be sure that you enter the correct admin details. Just in case, you have no idea about the login credentials then refer to the user manual. Once done, click on Continue to proceed.

7. Follow On-screen Prompts

Once you logged in, the Wavlink extender setup wizard will come into view. Follow the on-screen instructions to complete the setup process.

Following every step mentioned above will help you complete the Wavlink extender setup process.
Let us now check out the second method for the Wavlink WiFi extender setup – WPS.

Wavlink Extender Setup via WPS Method

WPS (WiFi Protected Setup) is the easiest way for you to complete the Wavlink extender setup process. All you need to do is follow the steps mentioned below.

• Power ON the Wavlink extender.
• Locate the WPS button at the back of the Wavlink extender.
• Press the WPS button carefully.
• The LED lights turn solid green. This means the Wavlink extender has been configured with the router properly.
• Connect to the Wavlink WiFi extender’s network. Use the same passcode you used for the network of the router.

Wavlink Extender Setup via Aerial Access Point

• Attach your range extender to a wall socket.
• Now, place the extender and router within a range.
• Then, open settings from your device and connect to the network “Wavlink-AC” or “Wavlink-N.”
• Now, go to a web browser and type 192.168.10.1. or wifi.wavlink.com at the address bar and enter the admin username into the setup page.
• The setup system will prompt you to select your time zone and make a system password.
• Next, select the Access Point or LAN Bridge to create a new network and password and press “Apply.”
• Lastly, connect your router to the range extender through an Ethernet Cable.

In this way, you can easily configure your Wavlink wireless range extender.

In a Nutshell

That’s all! You can now complete the Wavlink extender setup process using any of the three methods described above. We believe that with the help of this post, you can easily finish the setup process in a trouble-free way. If you liked reading this post, do not hesitate to give a word of appreciation in the comment box. Thank you for reading the post.