The LEDs on the Netgear Orbi networking device are supposed to be lit and blue. Because a blue LED on the Orbi device demonstrates a good condition. But, if any of the LEDs turn or blink pink, then you need to think about it. Because Orbi pink light shows the issues in the device related to network.

So, if your device also shows the Orbi pink light or Orbi blinking white then you don’t need to worry at all. In this post, we will cover all the reasons and also provide you with various effective troubleshooting tips. However, you can also consider the given information related to Orbi blinking white.

We advise you hit the article from up to down without skipping the information. If you miss any point, then you will not able to fix the problem in no time. Read on!

Why is Orbi Blinking Pink Light?

Well, several reasons trigger the pink light issue. But, here we have mentioned only big ones so that you can identify them and will be able to fix this pesky issue in a hassle-free manner.

Technical Glitches

The foremost reason is temporary hiccups because due to this the functions of the device stop working and lead to issues.

Worn Out Cables

If you make the connections of Orbi and modem with an Ethernet cable, then there is a possibility that the cable is damaged or broken.

No Internet Connection

Orbi shows pink light when it is not connected to a stable and reliable internet connection.

WiFi Interference

Wireless interference also could be the reason because interference affects device’s connection by weakening or destabilizing the WiFi signal. Also, it results in slower internet speeds and even disconnections.

Outdated Firmware

Firmware plays an important role for networking devices. But, when the Orbi runs on its outdated firmware, then it may lead to the issue at hand.

That’s all about the contributing factors that caused the Orbi pink light issue. You don’t need to worry about it. This can be fixed easily by following quick hacks.

Fix: Orbi Blinking Pink Light Issue

Connect the Devices Properly

We start with this solution because to get the best from the Netgear Orbi, it should be well connected to the internet as well as satellite.

So, we advise you to check the Ethernet cable that you use to connect Orbi to the modem. Maybe you used a defective or damaged Ethernet cable. All you need to do is make a small check on the Ethernet cable. If you found any damage or broken area, In that case, change it or try to repair it if possible.

Moreover, if you make a wireless connection between the devices, then you need to keep them away from the home appliances because these devices cause wireless interference.

Contact ISP

Netgear Orbi shows the pink light when there is an issue with the internet service provider. So, what you have to do is call the ISP. You need to ask him to fix the internet connection as soon as possible. In case you find everything is fine from his side, then move to the next possible hack.

Update Netgear Orbi

Netgear Orbi pink light issue can trouble you if the firmware of the Netgear Orbi is outdated and corrupted, as mentioned above. So, you have to update its firmware by accessing the orbilogin.com default web address.

While updating the firmware, we suggest you do not interrupt the process. If you make a disturbance, then the entire procedure will come to a halt and you will not be able to fix it.

Relocate the Netgear Orbi

Now, you should try to change the location of the Netgear Orbi router. Maybe your Orbi router is placed at the wrong location in the house which is blocking its network. The best and ideal location to place the device is the center and higher area of the house.

Reboot the Device

If you are still in the same situation and none of the above hacks helped you, then rebooting the device is the best way to fix the problem. Below we have mentioned all the instructions to restart the device.