How to Use WPS Button on Netgear Router for Setup?

In case you are wondering how to use WPS button on Netgear router for setup, then this article is penned down for you. Here, we have talked about the entire process of setting up the router with the help of a WPS button. Taking this into consideration; read this article.

Steps to Use WPS Button on Netgear Router for Setup

1. Find the Right Location

The configuration process can be started by finding the perfect location for the wireless router. An ideal location should not be sharing space with cordless phones, washing machines, baby monitors, treadmills, televisions, Bluetooth speakers, microwave ovens, refrigerators, mirrors, fish tanks, aluminum studs, and much more.

Apart from this, do not keep your router near concrete walls. Otherwise, you will not be able to complete the setup process using the WPS button.

2. Supply Power to the Router

Plug your Netgear wireless router into a wall socket and make sure that it is not damaged. Locate the power button on the router and press it. Now, wait for the power LED to turn green. It is needed to turn green as it indicated that it’s getting an adequate and uninterrupted power supply.

By any chance, if the router’s power LED does not turn green, consider restarting it or plugging it into another wall socket in your home.

3. Use the WPS Button

The next step is in line is to pair up the networking devices, i.e. Netgear wireless router and the existing modem. For this, you need to use the WPS button on Netgear router for setup, exactly what you came here for. Thus, read the steps given in the next section to learn how to use the WPS button pair the devices.

Press the WPS button on the router, wait for some time, and then, press the button on the existing modem. In a minute or two, the LED will flash.

In this manner, you will complete setting up the Netgear router using the WPS button. In case, you got stuck during the process, it is recommended that you read the solutions presented in the following section.

Can’t Use WPS Button on Netgear Router for Setup?

Reason 1: WPS Button is Broken

The primary reason why you cannot use the WPS button on Netgear router for setup is because it is broken. Check for the same if you do not believe us. In case the WPS button is indeed broken, then get the router replaced with a new one by going the same showroom or shop from where you purchased it.

For your information, this can only happen if your Netgear router is under warranty. Or else, you will not be able to resolve the setup issue.

Reason 2: LED Light is Not Working

Another reason why you cannot use the WPS button on Netgear router is because of an assumption. It is an assumption that the button is working but in actual the WPS LED is not working which has led you to think that way.

In this case, you need to get the LED repaired. Once done, press the WPS button on both your devices and see if you are able to resolve the issue at hand or not.

Reason 3: WPS Button is Not Pressed

The last reason behind why you are not able to use the WPS button on Netgear router for setup is because the WPS button is not pressed on the existing modem. In order to set up the router, the WPS button needs to be pressed on both devices.

Thus, do what is required. In case you still do not get luck, then use another method to set up your networking device. By the way, the manual method as well as the Nighthawk app will require you to make use of the default Netgear router login credentials.

To Conclude

This was all about the guide discussing how to use WPS button for Netgear router setup. We hope that after setting up the device, you will be able to gain access to a blazing-fast and seamless internet connection on all your client devices. If you liked reading this article, do leave some words of appreciation in the comment section below.