Most of the time after completing the Wavlink repeater login and setup process, Wavlink extender devices do not operate as intended. To resolve this problem, we will give you some solving recommendations in this post. Let’s start the procedure right away.
Reasons Behind Your Wavlink Gadget Not Working
The extender can malfunction in a variety of ways.
- The repeater is significantly farther away from the router than anticipated.
- There is an issue with the software and firmware of the Wavlink extender.
- Or the Wavlink extender is not working with WiFi gadgets that haven’t been used.
- The Wavlink repeater connects with a broken ethernet cable.
- Your router and extender are placed close to metal appliances.
Resolve The Wavlink WiFi Device Error
Following are a few solutions to your Wavlink extender not working issue:
Check The Gap Between Both Devices
We advise positioning your Wavlink repeater unit close to the host router. To have the greatest internet connection, a distance of 10 to 15 feet is sufficient. Additionally, be sure to position your repeater device in the middle of your home and office.
Turn On/Off Your Wavlink Extender
- Turn off your Wavlink repeater first.
- Remove the Wavlink repeater power plug from the outlet at this point.
- Then, after a brief delay, restart your Wavlink repeater device.
- Finally, insert the power plug of the Wavlink repeater into the outlet.
Eliminate Inactive WiFi Devices
We advise you to remove any unused Wi-Fi-enabled devices from your home. You may quickly get a list of the devices, which connect to your Wavlink extender network. By going to the web management page for your extender. Remove any additional devices from the WiFi list right away.
Update Extender Firmware
You must go to the Wavlink Extender web management site to update the most recent version of the firmware file. Then, fill in the information that is requested on the page. Find an administrator option after that, and then enter the software upgrade file. Install any new firmware files you come across on your laptop or PC.
Reset Wavlink Extender
- First, take a look at the repeater device’s backside, where the reset hole button may be found.
- Next, press the reset hole button for some time while holding in the hairpin or sim ejector pin.
- The Wavlink repeater will then switch off all of its LEDs.
- Your Wavlink repeater entirely resets successfully.
Repeat the Wavlink extender setup procedure after the reset to get the Wavlink extender working error fixed.
Visit The Wavlink Extender Sign-In Page
- Set the power connector for the Wavlink repeater device in the power outlet as soon as possible.
- Grab the PC and launch Chrome after that.
- Add wifi.wavlink.com to the HTML field now.
- After reaching the web portal, fill out the details that show on the display page.
- Lastly, to finish the Wavlink extender login process, tap the login button.
Configuration Of Wavlink WiFI Extender
The Wavlink WiFi range extender can be configured in one of two ways.
Utilizing WPS Button
Make sure your primary router has the WPS button to use the WPS method. Replace your old router with a new router if your router lacks a WiFi-protected setup button.
- Place the Wavlink repeater unit close to the current router.
- Now, press the WPS buttons on the router and repeater for the device.
- The steady WPS LED on both devices then begins blinking.
- Since it indicates that the repeater and router devices have been effectively connected.
Through Web Portal
- The extender and a power source must now connect for the first time using the power adapter.
- Then, connect the extender to the computer system via an Ethernet wire.
- In the URL box of your browser, enter 192.168.10.1 or wifi.wavlink.com to access the Wavlink extender configuration website.
- If the Wavlink extender setup page is not visible to you, try a different browser.
- Then, on the login page, click the sign-in button after entering your Wavlink extender login information.
- There would be a need to select the setup method.
- The Wavlink extender setup will begin once the range extender option has been selected.
- You must reload the browser if the wifi.wavlink.com setup page becomes inaccessible.
- After that, complete the Wavlink extender’s configuration by adhering to the on-screen instructions.
- in order to receive the best signal possible in the dead zones, the extender should be positioned in the middle.
We hope that after reading this post, the Wavlink extender not working problem will be fixed. However, if you are encountering any other difficulty, talk to our technical professionals about it.
