Rockspace WiFi range extenders are the foremost networking device to enhance the WiFi range of your home router. But, sometimes it creates connectivity issues while accessing the extender login page. If you are also facing this issue or your range extender is not working properly then resetting the Rockspace extender to its default settings is the best option. If you have no idea how to reset the wireless range extender then take the help of the Rock space WiFi extender manual that came along with the device.
But, a lot of users are still unable to complete the reset process. Well, no worries. Walk through the instructions highlighted in this article and finish the rockspace extender reset process.
Steps to Reset the Rockspace Extender
The process to reset the Rockspace range extender is quite simple. You can reset the wireless range extender by using a web interface or using the Reset button. Follow the steps discussed underneath to complete the reset process.
Using Web Interface
The most common way to reset the Rockspace WiFi range extender is by using the manual method.
- Connect the WiFi Device
The first thing you need to do is take an Ethernet cable and create a hard-wired connection between the range extender and the wireless router. To avoid any technical glitches, make sure that the power cable connection is not loose. Just in case, the ethernet cable is defective then replace it immediately with the new cable.
- Launch Internet Browser
Once a strong connection is made between the WiFi devices, switch on your client device and open a web browser. You can select any browser of your choice such as Opera, Internet Explorer, Brave, Mozilla Firefox, or Vivaldi. To avoid technical hitches, be sure that your browser is upgraded to its newest version. Along with that, also clear all the Junk files from the computer.
- Access Web Page
Now, in the address bar of the browser enter the web address. The default web URL is re.rockspace.local. Once done, press the Enter key to proceed further. In case, the web address is not working then use the IP address. The default IP address is 192.168.0.254. Always keep in mind that the web address is not being typed in the search bar instead of the location bar. It will cause numerous other extender-related problems otherwise.
- Enter Login Details
The moment you hit the Enter key, the Rockspace login page will come into view. Here, fill in the default admin credentials in the given fields and click Log In. Just in case, you don’t know about the default username or password then take the help of the user manual.
- Reset the Extender
Once you logged in, the Rockspace web interface will display. Now, navigate to the Settings option and locate the Factory Reset button. Here, you will see a pop-up. Click the yes button to finish the process.
Apart from this, you can also perform the Rockspace WiFi extender reset process by using the Reset button. If you are not sure how to reset it then follow the instruction mentioned below will tell you how to reset the Rockspace WiFi extender.
Using Reset Button
Before you begin, make sure that your WiFi device is connected to the extender’s network.
- Firstly, connect the extender to the host router with the help of an Ethernet cable.
- Thereafter locate the Reset button on the Rockspace wireless range extender.
- Once it has been found, press and hold the button.
- Wait patiently, as the extender will restart by itself within a few minutes.
- At the time of the reset procedure, do not disconnect the WiFi devices, turn off the extender, or any other background activities.
In this manner, you can complete the Rockspace WiFi range extender reset process.
Final Words
That’s it! We conclude our guide on how to reset the Rockspace wireless range extender. We hope that you can easily reset the range extender to its default settings in a hassle-free way. Did you like reading this article? Leave your feedback in yes or no via the comment section. Your feedback might be helpful to your fellow readers.
