Informational Guide to Reset TP-Link WiFi Extender

In this technological era, TP-Link wireless range extenders have become a popular solution for increasing the coverage of WiFi signals in homes. But sometimes, these extenders create connectivity issues due to various reasons. One of the most common causes is an outdated version of the TP-Link firmware. If you are also facing connectivity issues then resetting is the best option to overcome these types of problems. Are you wondering how to reset TP-Link extender? Well, no worries. In this article, we will cover all the methods related to TP-Link WiFi extender reset.

Before you begin, walk through the steps to update the firmware of your TP-Link extender.

• Firstly, connect your range extender to the host router.
• Download the latest firmware version.
• Power on your client device.
• Once done, launch an internet browser.
• Thereafter, in the address bar of the browser, type the default web address.
• Press the Enter key.
• Now, the TP-Link login window will come into view.
• Fill in the default login details in the given fields.
• Click on the Log In button.
• Within a few seconds, the main dashboard will appear.
• Here, click Administration > Firmware Update.
• Click the Browse button.
• Choose File > Open.
• Select Start Update.

After a few seconds, your extender firmware will get upgraded to the most recent version. If you are still facing connectivity issues then go through the reset process mentioned in the below section:

Methods: How to Reset TP-Link WiFi Extender

There are two types of methods to reset the TP-Link WiFi range extender. Follow the instructions in exact order to finish the reset process.

1. Soft Reset Method: Through this method, you need to access the login panel to complete the reset process.

2. Hard Reset Method: In this method, you use a single button to finish the process.

TP-Link WiFi Extender Reset via Soft Reset

This is a very common way to reset the TP-Link wireless range extender. Follow the given below steps to complete the process.

1. Power on Extender

The first thing you need to do is insert the wireless range extender into the power socket. Make sure that your extender receives a stable and ample power supply.

2. Connect Your WiFi Devices

Now, grab an Ethernet cable and join the TP-Link range extender to the host router. Ensure that the power cable connection is finger-tight. On the off chance, if the Ethernet cable is worn out then replace it immediately.

3. Access Web Page

Once a strong connection is built between wireless devices, switch on the client device. Thereafter, load up a web browser on it. Fill in the default web address or IP address in the URL bar of the browser. Once done, hit the Enter key to proceed further. To avoid any login issues, make sure that it is running on the most latest version.

4. Enter Login Credentials

As soon as you press the Enter key, the TP-Link login window will come into view. Enter the default username or password in the given fields. Once entered, click on the Login button.

5. Reset the TP-Link Extender

Once you logged in, the TP-Link extender web-based management will display. Here, select Settings and click on Administration. After that, find the Reset option and click on it. Within a few seconds, the reset process will start.

TP-Link WiFi Extender Reset via Hard Reset

Another way to reset the wireless range extender using the Hard reset. If you are not sure how to reset the TP-Link WiFi extender then walk through the steps mentioned below:

• Insert your TP-Link range extender into the well-working power socket.
• After that, turn on the power button.
• Wait for a couple of minutes, till the LED light gets stable
• Once done, locate the Reset button on the WiFi range extender.
• Once you find it, press it carefully.

In this way, you can easily reset the TP-Link extender.

Bottom Lines

We conclude our guide on how to reset TP-Link extender to its default settings. We believe that with the help of the above-mentioned hacks you will easily reset the extender.